Friday, February 14, 2020

Best Budget Car Audio amplifier early 2020

    Best Budget Car Audio amplifier early 2020

    Taramps Smart 3
    certified dyno runs ,
    1915 @ 4 , 3122 @ 2 , 3300@ 1.3 , 3113@ 1 , 3063@ .8 , 2130@ .5
    anyone can buy it for 265$very very few amps can survive .8ohm cert runs , let alone .5ohm cert , and they were running it back to back runs at .5 cert down into the 10v range
    ive also seen 14v vs 11v testing and the numbers are very close , still well over 3k and its doing high dynamic 3-5k

    .5 OHM tests







    1OHM tests









    1.33 OHM tests






    2OHM tests








    4OHM tests








    .8 OHM tests










    Link to buy the Taramps Smart3 on amazon
    https://amzn.to/2Svm9so




    check out BigDwiz full video of Dyno runs and Bare vids detailed explanation on how the amp works also compared to HD3k and Bass 3k from taramps
    https://www.youtube.com/watch?v=DxMGPhNASl4 


    other dyno runs

    https://www.youtube.com/user/Facekicker

Wednesday, February 12, 2020

Car Amplifer Watt per $ List

little certified break down watt per $ dyno proven amps
If you want a amp on this list send me the videos of it on dyno , must be certified runs at 1 and 2ohm or 2 and 4ohm , as many as possible . must have at least 2 loads run

Orion hcca3000.1DsplX
6.89w per$ 1ohm
4.61w per$ 2ohm

Alpine MRV-m500
6.53w per$ 1ohm
4.33w per$ 2ohm

Belva BB3000dv2
10.68w per$ 1ohm
7.13w  per$ 2ohm

Taramps smart 3
8.01w  per$ .5ohm
11.55w per$ .8ohm
12.18w per$ 1ohm
12.73w per$ 2ohm
8.06w per$ 4ohm

Sundown SFB-3000D
9.70w per$ 1ohm
7.36w per$ 2ohm

Wolfram W-1500.1D
4.74w per$ 1ohm
3.01w per$ 2ohm
1.49w per$ 4ohm

pioneer GM-D9701
8.31w per$ 1ohm
5.55w per$ 1ohm

JL Audio HD1200-1
1.51w per$ 1.6ohm
1.60w per$ 2ohm
1.61w per$ 4ohm
0.78w per$ 8ohm

Synergy WFO2.1d
6.23w per$ 1ohm
3.85w per$ 2ohm

wolfram c2400.1
8.46w per $ 1ohm
5.50w per $ 2ohm

Belva BB5000dv2
8.81w per$ 1ohm
5.78w per$ 2ohm

Wolfram w4500.1
6.26w per$ 1ohm
3.69w per$ 2ohm

wolfram w7500.1
6.60w per$ 1ohm
3.72wper $ 2ohm

Brutal sounds bs5.1
6.37w per$ 1ohm
3.25w per$ 2ohm

Brutal Sounds BS2.1
5.78w per$ 1ohm
3.86w per$ 2ohm

NVX VAD17001
8.51w per$ 1ohm
6.50w per$ 2ohm

Boss audio AR4000d
8.25w per$ 1ohm
6.45w per$ 2ohm

Orion XTR2500.1DZ
9.39w per$ 1ohm
6.95w per$ 2ohm

Orion XTR1500.1DZ
6.62w per$ 1ohm
5.10w per$ 2ohm

Kicker CXA800
4.61w per$ 1ohm
2.87w per$ 2ohm

Kicker CXA400
3.80w per$ 1ohm
2.28w per$ 2ohm

Rockford Fosgate T2500-1bdCP
2.58w per$ 1ohm
2.11w per$ 2ohm

NVX BDA7501
5.79w per$ 2ohm
3.34w per$ 4ohm

Hifonics Hercules H353000.1D
5.86w per$ 1ohm
3.78w per$ 2ohm

Hifonics H35-1700.1D
4.59w per$ 1ohm
3.00w per$ 2ohm

JL Audio RD1000/1
3.44w per$ 2ohm
2.02w per$ 4ohm

Skar Audio RP2000.1D
9.37w per$ 1ohm
5.89w per$ 2ohm
3.31w per$ 4ohm

Sundown sam500
2.84w per$ 1ohm
1.85w per$ 2ohm
1.12w per$ 4ohm

SQ S1-2250
7.38w per$ 1ohm
4.94w per$ 2ohm
2.60w per$ 4ohm

Skar RP1200.1D
7.62w per$ 1ohm
5.63w per$ 2ohm
3.48w per$ 4ohm

Monday, February 10, 2020



Videos coming soon of the NVX GlowXR3 ! Love this portable bluetooth speaker, the lighting is very nice also ! Its bright enough when set to white to use as a lamp for your desk , working in the garage and need a little more light or camping ect. It also dims way down or can be shut off , color modes are nice . You can set it to change with music or smooth transition and other settings. It's very clean sound that is loud enough to use while working on something fairly noisy and enjoy it . Check it out on nvx's website











Saturday, January 25, 2020

NVX VAD 27001 Mono Amplifier guts !

NVX VAD 27001 Mono Amplifier guts !














                                              NVX VAD 27001 Mono Amplifier guts !

nvx vad power clamp tests around 13.5v were between 1750 to 2100rms after rise depending on frequency , rising to 2.3-1.7ohm , very good output for the size and price ! judging by clamp numbers i feel this amp would pass on dyno testing at rated power

check out my videos of this amp in action ! i have 2 vad27001 on 10 102 nvx vcw subwoofers walled !  https://www.youtube.com/user/mazda2284/videos




Thursday, August 29, 2019

Yinlong New High Rate LTO cells ! 9AH


New Yinlong High Rate LTO cells ! 9AH
size: Dia 32mm, length 140mm
charge and discharge rate: 15C
Voltage: 1.9v-2.8v per Cell
Max charge/discharge 140A








New Yinlong High Rate LTO cells ! 9AH
size: Dia 32mm, length 140mm
charge and discharge rate: 15C
Voltage: 1.9v-2.8v per Cell
Max charge/discharge 140A

Saturday, May 11, 2019

Xtreme Lithium Cells , scam / bad product


if you would like to learn how to build lithium batteries yourself that are Much safer check out my group on facebook !
https://www.facebook.com/groups/2142284452700573









/




Thursday, March 15, 2018

Actiontec T3200M Review and Problems



T3200M
T3200M best
T3200M tested with another program
T2200 first test


Actiontec T3200M Review and Problems

I recently received a new T3200M modem made by actiontec for my TDS DSL internet service . It was pitched to me that the new modem would have better speeds and have better wifi range supporting b/g/n/ac wireless and also support Bonded service .
the tech came to install the modem and it was fast and easy to setup , at first my download speeds were a little better but my upload seemed to stay about the same , about an hour after the tech leaves my internet cuts out and i get a red internet light on the modem , no big deal just reset the modem and good to go right ? well about every hour after that i had the same problem , internet would cut out and red light on the modem , at the time i did notice some problems viewing webpages and my games seems to be kinda laggy so i ran some speed tests and the download seemed to be fine , this continued for a couple days before we had our tech come back out on a friday and replace the modem with a brand new T3200M again , he also went through our house wiring to make sure everything was fine , while my tech was here to do the install he mentioned that he was installing bonded service just down the road from me and that i should call to get it setup so i could make use of the new faster service .  the new modem worked fine for about 30min after the tech left and the problems start all over again . being that he came on friday i could not have him come back out till monday so i was stuck with the problems all weekend so i did as much reading and trouble shooting as i could myself , i tried changing many settings in the modem ''disabled ipv6 , diagnostics , ect '' nothing seemed to help , as my speed tests looked normal i was very confused where the lag was coming from , i had a new computer sitting there ready to be put together so i built it with fresh everything hoping maybe it was just my computer that was the problem , the new computer still had the same problems hard wired and on wifi , at this point i was thinking maybe the problem was widespread and not just me . i called tech support to get monday setup for the service tech to come back out to try and fix the problem , while talking to them i asked about the bonded service and they told me it was not available ''odd because my service tech was saying he was installing the bonded at a house down the road from mine that is slightly farther out of town '' so monday comes around and the tech comes out and starts by just rewiring my house with all new phone and cat5 cable to my modem , we check it after the wiring is done and still same problems , so he goes down to the hub downtown and switches my port and checks everything down there , he comes back and still same problems but he brought a older T2200 modem with him , we hook it up and the first test is much much better upload speeds . problem solved ! so my overall review is that the T3200M modem just does not work properly with standard service , also i was told the wifi range and service was better with the T3200M and that also turned out to be wrong , the T2200 had much better range with my devices . 

pictures of the tests were test that finished , many tests with the T3200M would fail on upload . clearly the best test with the T3200M was much worse than the first test run with the T2200